Incremental Magnetic Configuration Tables and Accessories

  • Manufactured by: Posital Fraba


Ask a Question




Product Description:




1 - Communication Interface
INR RS422 (TTL), Supply Voltage 8 − 30 V
INS RS422 (TTL), Supply Voltage 4.75 − 5.5 V
INH Push-Pull (HTL), Supply Voltage 4.75 − 30 V
7 - Connection Type
CAW Cable: Axial 1 m
2AW Cable: Axial 2 m
5AW Cable: Axial 5 m
AAW Cable: Axial 10 m
CRW Cable: Radial 1 m
2RW Cable: Radial 2 m
5RW Cable: Radial 5 m
ARW Cable: Radial 10 m
PAM Connector: Axial M12 (5 pin)
PAQ Connector: Axial M12 (8 pin)
PAL Connector: Axial M23 (12 pin)
PAP Connector: Axial M23 (16 pin)
PRM Connector: Radial M12 (5 pin)
PRQ Connector: Radial M12 (8 pin)
PRL Connector: Radial M23 (12 pin)
PRP Connector: Radial M23 (16 pin)
Please see technical drawings below
2 - Pin Assignment
0 POSITAL Standard
3 & 4 - Pulses per Revolution
X−XXXX
Choose any pulse count up to 16384
5 - Mechanical Design
Please see technical drawings below
6 - Protection Class
A IP54
0 IP54 to IP65
S IP54 to IP67 (Only Clamping Flange)
D IP54 to IP69K
G IP54 to IP69K (Stainless Steel)










Couplings

Couplings are used to attach the encoder shaft to the machines’ moving shaft. A wide variety of flexible Disc Couplings, Bellow Couplings and Jaw couplings with various combinations from diameter 6mm to 10mm are available.

Reducing Adapters

Reducing adapters when used in combination with hollow shaft encoders, enable the reduction in diameter of the hollow shaft. POSITAL provides some of the most commonly used shaft reducing adapters ranging from 6mm to 15mm.

Adapter Flanges

Adapter flanges are generally used with POSITAL encoders to exactly fit into the customers’ installation or control cabinet. A new set of commonly used adapter flanges will be released soon.

Clamp Discs

Clamp discs are used to secure the clamp flange of the encoder to the customers’ installation cabinet. POSITAL provides both concentric and eccentric clamp discs to facilitate the same.

Torque Support

POSITAL provides torque support sets comprising of tethers, clamping discs and mounting screws. These are generally used to anchor the hollow shaft encoder to the customers’ system and prevent it from rotating along with the driving shaft.

Tools

A new set of tools and mounting accessories like Allen-Keys, screws and washers for mounting POSITAL encoders will be released soon.





Connectors

Includes all suitable counter connectors (both straight and right angled) for the Posital product line. The connectors have a wide range of allowable cable diameter and wire gauge for flexible usage.

  • Connector M12 Female and Male with 4, 5 or 8 pins
  • Connector M23 Male 9 pin

Cable Assemblies

Includes all suitable counter connectors (both straight and right angled) with either PUR or PVC cables integrated into them. Available in fixed lengths from 1m to 10m with options for extension based on customer requests.

  • Connecting Cable M23 Female 12, 16, 26pin
  • Connecting Cable M12 Female 5, 8 pin
  • Connecting Cable Rt M12 Female 5, 8, 12pin
  • Connecting Cable M12 Male 8 pin