Inclinometer Configuration Tables

  • Manufactured by: Posital Fraba


Ask a Question




Product Description:



1 - Technology
ACS MEMS, Accuracy 0.1°
ADS MEMS, Accuracy 0.5°
AGS Fluid Cell

2 - Measurement Range
010 ±10° (ACS, ADS)
020 ±20° (ACS, ADS)
040 ±40° (ACS, ADS)
060 ±60° (ACS, ADS)
080 ±80° (ACS, ADS)
090 90° (ACS, ADS)
120 120° (ACS, ADS)
180 180° (ACS, ADS)
270 270° (ACS, ADS)
360 360° (ACS, ADS)
005 ±5° (AGS)
015 ±15° (AGS)
030 ±30° (AGS)

3 - Number of Axis
1 Single Axis (ACS, ADS)
2 Dual Axis

4 - Communication Interface
CA01 CANopen (ACS)
M100 Modbus RTU (ACS)
D101 DeviceNet (ACS)
S101 SSI Binary (ACS)
S302 SSI Gray (ACS)
C901 J1939 (ACS)
SV00 Voltage 0.5 to 4.5 V + RS232 (ACS, ADS)
SV10 Voltage 0 to 5 V + RS232 (ACS, ADS)
SV20 Voltage 0 to 10 V + RS232 (ACS, ADS)
SV40 Voltage 0.5 to 9.5 V + RS232 (ACS, ADS)
SC00 Current 4 to 20 mA + RS232 (ACS, ADS)
SC1 Current 4 to 20 mA + RS232 (AGS)
SV1 Voltage 0.5 to 4.5 V + RS232 (AGS)
CA1 CANopen (AGS)
S01 RS232 (AGS)
SP1 PWM (AGS)
SS1 Switch (AGS)

5 - Mounting
H Horizontal (Dual Axis)
V Vertical (Single Axis)

6 - Housing Material
E2 Fibre-Reinforced Plastic (ACS, ADS)
H2 A luminum (ACS, ADS)
0H A luminum (AGS)

7 - Connection Type
PM Connector: M12 (ACS, ADS)
CW Cable Exit: 1m (ACS, ADS)
2W Cable Exit: 2 m (ACS, ADS)
5W Cable Exit: 5 m (ACS, ADS)
AW Cable Exit: 10 m (ACS, ADS)
PL Connector: 2 x M12 Male (ACS)
PN Connector: 1 x M12 Male & 1 x M12 Female (ACS)
P8M Connector: M12 (AGS)
CRW Cable Exit: 1 m (AGS)

   


Couplings

Couplings are used to attach the encoder shaft to the machines’ moving shaft. A wide variety of flexible Disc Couplings, Bellow Couplings and Jaw couplings with various combinations from diameter 6mm to 10mm are available.

Reducing Adapters

Reducing adapters when used in combination with hollow shaft encoders, enable the reduction in diameter of the hollow shaft. POSITAL provides some of the most commonly used shaft reducing adapters ranging from 6mm to 15mm.

Adapter Flanges

Adapter flanges are generally used with POSITAL encoders to exactly fit into the customers’ installation or control cabinet. A new set of commonly used adapter flanges will be released soon.

Clamp Discs

Clamp discs are used to secure the clamp flange of the encoder to the customers’ installation cabinet. POSITAL provides both concentric and eccentric clamp discs to facilitate the same.

Torque Support

POSITAL provides torque support sets comprising of tethers, clamping discs and mounting screws. These are generally used to anchor the hollow shaft encoder to the customers’ system and prevent it from rotating along with the driving shaft.

Tools

A new set of tools and mounting accessories like Allen-Keys, screws and washers for mounting POSITAL encoders will be released soon.





Connectors

Includes all suitable counter connectors (both straight and right angled) for the Posital product line. The connectors have a wide range of allowable cable diameter and wire gauge for flexible usage.

  • Connector M12 Female and Male with 4, 5 or 8 pins
  • Connector M23 Male 9 pin

Cable Assemblies

Includes all suitable counter connectors (both straight and right angled) with either PUR or PVC cables integrated into them. Available in fixed lengths from 1m to 10m with options for extension based on customer requests.

  • Connecting Cable M23 Female 12, 16, 26pin
  • Connecting Cable M12 Female 5, 8 pin
  • Connecting Cable Rt M12 Female 5, 8, 12pin
  • Connecting Cable M12 Male 8 pin