C 200 Calorimeter

  • Model: G-D35-0008802501
  • Manufactured by: IKA


Ask a Question




Product Description:
C 200-System consists of the following components:
  • Measuring cell C 200
  • Decomposition vessel C 5010
  • Oxygen filling station C 248
  • Consumables for calibrations and installation
  • C 200 halogen resistant version available - 8803701

Features

  • Space-saving and low cost combustion calorimeter for determining gross calorific values of liquid and solid samples.
  • Validation according to DIN 51900,ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711.
  • Suitable for teaching and training, as well (f.e technical- schools, universities) and for industrial laboratories with less analyses..
  • Manual handling for water and oxygen filling.
  • Four different working methods, isoperibolic, dynamic, manual, time controlled makes possible an ideal adjustment of different operating tasks.
  • Clear and easily explained display which is simply to use .
  • With an external power pack, "world tension useable" from 100 - 240 V AC, 50/60 Hz. The operating voltage of the calorimeter is 24 V DC low- voltage.
  • Manual ( teaching mode): ignition and end of the measurement will be done by the operator himself; the temperature increase will be indicated at the display each minute.
  • All calculations have to be done manually.
  • At the other three modes ignition and calculation of the gross calorific value will be done automatically.
  • The gross calorific value will be shown on the display. Acid corrections and calculations of the net calorific value have to be done manually.
  • The decomposition vessel can be equipped in to use an combustible crucibles C 14
  • (accessory C 5010.4 attachment is necessary)
  • User-friendly software C 5040 Calwin for controlling the calorimeter and administration of measuring data (accessory). Transfer of the data to Excel or Word are possible.
  • Up to eight IKA measuring cells can be controlled by a single PC, using a multiserial plug in card PCI 8.2 (accessory)
The modes have different measuring times:
  • Isoperibolic: approx: 17 min.
  • Dynamic : approx. 8 min
  • Manual : approx. 17 min (depending on the operator)
  • Time controlled : 14 min