HOSKIN

Product Categories

Manufacturers

Manufacturer Info

ParaFuel™ NIR In-Line Analyzer - Crude Oil

  • Model: G-G85-Parafuel-Crude Oil
  • Manufactured by: Grabner Instruments


Ask a Question

Product Description:
Comprehensive Fuel and Crude Oil Analysis through NIR Spectroscopy

The ParaFuel™ NIR Process analyzer from LT Industries provides comprehensive inline analysis of Diesel, Gasoline, Jet Fuel, Kerosene, Crude Oil, Blending components and Blended Fuels for a wide range of critical properties including Octane, Distillation Points or RVP. The analyzer is also available in a benchtop version designed to improve efficiency when testing in laboratories.

Validate Fuel and Crude Oil Quality
With the ParaFuel™ analyzer, accurate measurement of the properties of petrochemical products and crude oils  is easy. Whatever the analytical need – inspection of crude oil or finished products, inline property measurements, or validating shipments – the ParaFuel™ can do the job. The optical analysis technique allows for easy integration and rapid inline measurement. ParaFuel™ Process Systems measures key chemical and physical properties rapidly and accurately directly in process, to monitor changing process conditions in real time and to adjust as necessary. The simple test procedure allows for greater experimental repeatability — and it does not require special operator skills.

Inline Testing of up to 20 measuring points
With the capability to measure 20 points with a single analyzer, you can validate quality and performance at all stages — from crude samples at the well to downstream refining.  Improve your process knowledge and control.

Measure in process or in the laboratory
The ParaFuel™ Process Analyzer comes complete with probes and flow cells built to suit your measurement needs. They are available in a variety of lengths, configurations and materials depending on your measurement requirements. High pressure and temperature sampling probes can withstand the conditions associated with oil production and refining. Instruments are designed for direct integration into existing control systems via the LTBus automation & communication software. The ParaFuel™ Analyzer can communicate directly via standard protocols such as Modbus and 4-20mA. The ParaFuel™ Benchtop System provides the same high quality measurements as the process system.

Key Features 
  • Designed for 24/7 operation
  • Measure up to 20 process points with one analyzer
  • Probes and flow cells for continuous processes
  • Easy integration into existing DCS
  • Fully automated user interface
  • Remote diagnostic capability
  • Remote update capability
  • Enclosures for protection against dust, water and environment 
Real-time-Analysis

Automated, nondestructive inline analysis, completed within seconds. Results sent to your DCS, PLC, or LIMS.

  • Control  the  use  of  high-value  crudes  and  chemicals — Measure concentrations and use only what you need
  • Validate quality throughout the process —  Determine where and when product falls out of specification
  • Make process adjustments in real time —  Reduce waste by adjusting processes rather than discarding batches
  • Reduce energy consumption and increase process efficiency — Accurately determine concentrations and reaction progress
  • Design quality into your process —  Achieve higher standards than are possible with batch testing alone

Benefits

  • ParaFuel™ analyzers are utilizing LT Industries´ knowledge of over 30 years experience in developing NIR analyzers
  • Fast inline or laboratory measurement
  • Real time monitoring of multiple process streams
  • Automated results on a simple interface
  • Validation of incoming product
  • Improved product quality
  • Improved repeatability
  • Reduced expenses
  • Minimal operator training
  • Rapid return on investment
ParaFuel™ Crude Oil Analyzer

Common Measurements
Vapor Pressure    
Pour Point 
Viscosity 
CCR
Methanol 
Olefins 
Hydrogen 
Wax Content
Aniline Point 
Freeze Point 
Cloud Point 
Distillation Points  
n-Paraffins
C/H Ratio
Water Content
Yields 
SARA
Total Aromatics 
API Gravity / Density     
Emulsion Stability
Acidity / TAN
Solids 
Asphalt 
TBP
Asphaltene Content 
Asphaltene Deposition
Asphaltene Precipitation
Sulfur
  
Technical Data ALL Analyzers
Power Supply 100-240 VAC, 50/60 Hz 
Scan time 30 seconds (user adjustable) 
Computer Interface Standard Windows PC with LT Software Package           
A-C Communication     Standard TCP/IP Ethernet

 

  
Technical Data PROCESS Analyzer
Classification C1D2 Standard, C1D1 Optional  
Control System Communication         Modus RTU Standard (Option: Modbus TCP, 4-20 mA)     
Number of measurement points Up to 20 
Sample Requirements Up to 150 C and 1000 psi  
Fiber Optic Cable Length 3 m standard, up to 200 m  
Sample Temperature Measurement          Automatic, built-in measurement

 

  
Technical Data BENCHTOP Analyzer
Dimensions 12" x 15" x 13" (30.5 cm x 39.7 cm x 34.9 cm) 
Data Storage         Data automatically logged and stored
Standard TCP/IP connection for integration into 
Lab Network and existing LIMS

 

  

Continuous product development may make it necessary to change product specifications without notice.