Specifically designed to measure ground and surface water pressure, temperature and levels, the WaterLOG®
Submersible Pressure Transducer
(H-3123) can transmit data digitally over cable lengths of up to 1000
feet (304.8 m). Its sleek stainless steel diaphragm and polyurethane
vented cable, give the Submersible Pressure Transducer the durability it
needs to survive rugged environments. Unique to the Submersible
Pressure Transducer is the dry air moisture barrier system, providing
atmospheric compensation with no on-site calibration required. The
sensor is simple to install, contains SDI-12 output and it designed to
produce accuracy over temperature range that exceeds ±0.01 ft (3 mm) of
water. Cable lengths are available from 25 ft (7.62m) to 300 ft (91.44m) in increments of 25 ft (7.62m) and from 300 ft (91.44m) to 1000 ft (304.8m) in increments of 100 ft (34.48m).
The WaterLOG® Submersible Pressure Transducer (H-3123) was designed to measure and transmit water level, temperature and pressure data digitally over long cable lengths.
- Linear deviation is less than 0.02%
- Accuracy over temperature range exceeds ±0.01 ft (3 mm) of water
- Stainless steel sensor diaphragm, ballast and casting
- SDI-12 Output
- Polyurethane vented sensor cable is durable and rugged
- Dry air moisture barrier system provides atmospheric compensation
- No on-site calibration requirement
