The P 700 for orthophosphate measurement can be used as a stand alone
analyzer or used with the IQ SensorNet 2020 XT continuous monitoring
and control system. Use the P 700 throughout the wastewater plant from
pre-sedimentation to biological tanks to the effluent. The P 700
provides continuous data to help operational efficiency improvement
decisions and phosphate elimination verification.
- Compact design - pump for permeate supply is integrated in the analyzer housing
- Simple system configuration with the IQ SensorNet; measure additional parameters in addition to orthophosphate
- Low reagent consumption - exchange solutions on average every 4-8 months, reduces overall cost vs. other analyzers
- Automatic or manual calibration (adjustable)
- Uses proven Vanadomolybdate (yellow) method of detection
- Wide measuring range - two measuring ranges allow the P700 to be used in a wide range of locations throughout the WWTP
- Indoor or outdoor versions available with heating or cooling
- 0.45 micron filter complies with Standard Methods
| Measurement Method / Channels |
Vanadomolybdate (yellow) |
| Measurement Range |
PO4-P: Range A: 0.05 to 15.00 mg/L; Range B: 1 to 50 mg/L PO4: Range A: 0.15 to 46.00 mg/L; Range B: 3 to 153 mg/L |
| Operating pH Range |
5 to 9 |
| Operating Temperature |
-20 to 40ºC (-4 to 104°F) |
| Parameters Measured |
Orthophosphate |
| Power |
115/230 VAC |
| Precision |
PO4P: Range A: 0.05 to 15.00 mg/L; Range B: 1 to 50 mg/L; PO4: Range A: ±2% or ±0.15 mg/L, whichever is greater; Range B: ±2% or ±3 mg/L, whichever is greater |
| Response Time |
T-90 < 5 minutes |
| Storage Temperature |
-20 to 50ºC (-4 to 122°F) |
| Unit of Measure |
mg/L |
| User Calibratable |
automatic or manual calibration (adjustable), Yes |
E-528-8P-000Y
Indoor version without pump
E-528-8P-001Y
Outdoor version without pump
E-528-8P-010Y
Indoor version with pump
E-528-
8P-011Y
Outdoor version with pump
