The ANALITE NEP495 turbidity probes can monitor and log turbidity and
temperature in a sturdy self-contained package that is easy to set up
and easy to selectively download collected data. The ANALITE NEP495
microprocessor-based turbidity probe is designed for monitoring and
logging applications where turbidity levels of up to 1,000NTU may be
encountered. Available ranges are 40NTU, 100NTU, 400NTU and 1,000NTU,
which can be set by the user. The ANALITE NEP495 probe, with its
integral wiper assembly, is designed to operate over an extended period
of time where bio-fouling or sedimentation build-up is likely.
The ANALITE NEP495 turbidity probes may be submerged to a depth
rating of 100 meters (approx. 330 feet). The ANALITE NEP495 probe uses
90° optics and employs infrared light in accordance with ISO7027; it also uses
a unique modulation technique that ensures almost total rejection of
ambient light conditions.
The user may calibrate the probe at any time; the RS232
interface allows the user to upload later versions of firmware when needed.
The ANALITE NEP495 probe is similar to the ANALITE NEP395 probe but
with the inclusion of temperature measurement and a flexible self-contained logging function. As normally supplied, the ANALITE NEP495 can
store over 30,000 data sets with each data set consisting of turbidity,
temperature, time and date. Logging intervals can be set from less than one second to over 18 hours. Data is stored in non-volatile memory.
The ANALITE NEP495 is self-contained requiring no external power or
commands once logging has commenced. The internal batteries have a life
expectancy of over 30,000 data sets or about 60 days - whichever comes
first and assuming a wipe prior to each reading has been completed.
